Configuring CDR Filters and Report Level
You can configure various CDR filters and the stage of the call at which you want the device to generate and send CDRs. For a detailed description of the parameters described in this section, see Syslog, CDR and Debug Parameters.
|
➢
|
To configure CDR filters and report level: |
|
1.
|
Open the Call Detail Record Settings page (Troubleshoot menu > Troubleshoot tab > Call Detail Record folder > Call Detail Record Settings). |
|
2.
|
Configure CDR filters: |
|
●
|
In the 'Call-End CDR SIP Reasons Filter' [CallEndCDRSIPReasonsFilter] field, configure the SIP release cause codes that if received for calls, the device doesn't generate and send Call-End CDRs. |
|
●
|
From the 'Call-End CDR Zero Duration Filter' [CallEndCDRZeroDurationFilter] drop-down list, select Enable if you want the device to not generate and send Call-End CDRs for calls of zero (0) duration. |
|
3.
|
Configure the call stage at which CDRs are generated and sent: |
|
●
|
From the 'CDR Report Level' [CDRReportLevel] drop-down list, select the stage of the call at which you want signaling-related CDRs to be generated and sent. |
|
●
|
From the 'Media CDR Report Level' [MediaCDRReportLevel] drop-down list, select the stage of the call at which you want media-related CDRs to be generated and sent.
|
